Piper 28-151/161 Dual Mufflers Warrior / Cadet Exhaust System Itemized Parts List
↖ Front of Aircraft
| Item | Part # | Description | Condition |
|---|---|---|---|
| 01 | A66894-03 | MUFFLER | NEW PMA |
| 04 | A62232-00 | STACK - RH - REAR - 2 BOLT FLANGE | NEW PMA |
| 05 | 37922-02AWL | STACK - RH - FRONT - EXTRA BEND - 161 - 37922-02AWL | NEW PMA |
| 05 | A62230-00 | STACK - RH - FORWARD - 2 BOLT FLANGE | NEW PMA |
| 06 | A62231-005 | STACK - LH - REAR - 2 BOLT FLANGE | NEW PMA |
| 07 | A35300-00 | STACK - LH - FORWARD - 2 BOLT FLANGE | NEW PMA |
| 08 | A99568-003 | SHROUD - TOP - 151/161 | NEW PMA |
| 09 | A35303-803 | SHROUD - BOTTOM - 151/161 - SOLD AS AN ASSEMBLY WITH A35631-000 | NEW PMA |
| 10 | A63243-002 | CLAMP - MUFFLER TO STACK - PIN - 1.75" | NEW PMA |
| 11 | A35631-000 | CARB HEAT TAKE OFF-SOLD WITH A35303-803 AS AN ASSEMBLY | NEW PMA |
| N/S | A35631-000 | CARB HEAT TAKE-OFF | NEW PMA |
| N/S | A35622-002 | GUSSET, SHROUD SUPPORT | NEW PMA |
Check body of mufflers for chafe marks where shroud rests on muffler. Make sure that the risers can be removed from the muffler. The riser tube end tends to mushroom out and seize up.
PA 28-151 1974 through 1977
PA 28-161 1977 + Up
PA 28-151/161 Shroud Note:
Carb Heat Shroud is separate part # but rivetted between endplate & shroud skin of bottom shroud. A support bracket is screwed to the carb heat shroud & then attached to the endplate of the top shroud.
RF stack 62230-00 PA 28-151 74-5001 +up, PA 28-161 77-16001 through 77-16323
RF stack 37922-02AWL PA 28-161 28-7816001 + up